preconfigured for:
-Visual Pinball X
-Pinball FX2/3
-ProPinball Timeshock
-Future Pinball
Analogue Plunger and real analogue nudging for:
-Visual Pinball X
-Pinball FX2/3*
-ProPinball Timeshock
*X360ce is needed, we can support you via Teamviewer or Remote Desktop if you have issues setting things up!
preconfigured for following Toys:
-Flipper left/right
-Magnasave Buttons
-10x Solenoids
-Knocker (Zeitgeschützer Ausgang zum Schutz der Spule)
-Flasher
-Shaker
-Gearmotor
-Fan
-Beacon
-RGB LEDs for Flipper- and Magnasave-Buttons
-LEDs for Start, Extraball, Exit, Launch Ball, Coin(s)
-Undercablight Smart and Complex, each with RGB-Channels
-Hellball incl. RGB channels
-5xRGB Flasher
-real Coindoor interlock switch and Simulation preconfigured
-complete Coindoir buttons preconfigured for Visual Pinball X
optional with our Chimeboard:
-5x time- and hardware protected outputs for chime units
-3x custom time protected outputs
We STRONGLY recommend to use real pinball coils only with time- and hardware-protected outputs (like the Chimeboard)! In case of malfunction (softwareside VPX or other) the coils could burn without this protection.
Pinscape is completely Open Source, continously maintained and developed and the most advanced system on the market!
For max. compatibility a usage as LedWiz-Clon is possible, but not mandatory.
To protect your hardware from inductive loads of real coils (solenoids, Knocker, Shaker etc.) we suggest to use diodes and fuses especially on these outputs!
For individual configuration please use the Config-Tool. We provide help if needed..
Pinscape expansion board Configuration
Configuration file for the Completely polluted Expansion Board. Right-click the file down below and select "save as..."
PDF-Overview for the polluted Expansion Board Configuration Board
Shipping weight: | 0,70 Kg |
Product weight: | 0,60 Kg |