RGB Flipper Button Set
LEAF SWITCH
Our Leaf switch buttons are the worlds first with adjustable pressure!
Depending on your personal taste you modifiy easily from normal to ultra in 3 steps.
- Normal
average pressure, slight tendecy to soft, average way until contact is achieved
- Hard
harder pressure needed but slightly shorter contact way
- Ultra
very hard but ultra short time until contact is achieved
You can readjust the contact way by inserting our included spacers
RGB LED
Our buttons include a RGB LED!
You can control it through DOF config and the matching table settings and a controller, eg. our PINSCAPE, that is capable of controlling DOF toys.
Depending on your configuration you can have different colors depening on what table you use or even different on the same one!
We carry 2 different sets, with and w/o Resistors included
Our Pinscape already has the matching resistors included so you can choose the one without resistors.
Owner of a PC1, 2, or other VPin controllers can use the 12V resistor package and wire the LEDs and buttons to the correct ports of their controllers.
For exact configuration and installation please contact your Vendor as we DO NOT PROVIDE SERVICE for these.
INSTALLATION
Our Button is optimized for installation in 18mm (approx 3/4") thick material.
you only need to drill a single hole with 18mm diameter.
The integrated thread makes the purchase of a separate nut obsolete.
Just screw the the Button into the the LED housing and you're done! Simple as that!
We produce our buttons in our own shop in FDM 3D printing technique.
We chose this step to make these buttons available for more people due to reduced production costs.
Additionally,we are capable of reacting to customer wishes (eg different color or sizes).
Our Leaf switch buttons are the worlds first with adjustable pressure!
Depending on your personal taste you modifiy easily from normal to ultra in 3 steps.
- Normal
average pressure, slight tendecy to soft, average way until contact is achieved
- Hard
harder pressure needed but slightly shorter contact way
- Ultra
very hard but ultra short time until contact is achieved
You can readjust the contact way by inserting our included spacers
RGB LED
Our buttons include a RGB LED!
You can control it through DOF config and the matching table settings and a controller, eg. our PINSCAPE, that is capable of controlling DOF toys.
Depending on your configuration you can have different colors depening on what table you use or even different on the same one!
We carry 2 different sets, with and w/o Resistors included
Our Pinscape already has the matching resistors included so you can choose the one without resistors.
Owner of a PC1, 2, or other VPin controllers can use the 12V resistor package and wire the LEDs and buttons to the correct ports of their controllers.
For exact configuration and installation please contact your Vendor as we DO NOT PROVIDE SERVICE for these.
INSTALLATION
Our Button is optimized for installation in 18mm (approx 3/4") thick material.
you only need to drill a single hole with 18mm diameter.
The integrated thread makes the purchase of a separate nut obsolete.
Just screw the the Button into the the LED housing and you're done! Simple as that!
We produce our buttons in our own shop in FDM 3D printing technique.
We chose this step to make these buttons available for more people due to reduced production costs.
Additionally,we are capable of reacting to customer wishes (eg different color or sizes).
Anleitung
Shipping weight: | 0,15 Kg |
Product weight: | 0,15 Kg |
Average product review
Total entries:
3
Total entries:
3