Teensy Control Box

(1 Reviews)

SKU: GGS62
GTIN: 7061251374695
Category: VPin

Teensy Controller for controlling DOF-based addressable WS2812b LEDs

Nice little enclosure, no naked, ugly pcb like OctoWS
Update: Teensy 4.0 ~~Teensy 3.2~~
8 preconfigured Outputs:
Playfield back
Playfield right
Playfield left
new: Buttons right
new: Buttons left
new: Speaker Rings
new: addr. Flasher Bar
Undercab complex

preconfigured as in description

65,00 €

incl. 19% VAT , plus

Low stock level
Delivery time: 5 - 6 Workdays (DE - int. shipments may differ)

Description
Reviews
Others (1)

Update:

Delivering with the newest Teensy 4.0!
We also expanded the output ports to 8(!!!)
To identify issues with config or wiring we added a small bootup animation

********************
Important notice:
You don't need to follow any confusing or outdated tutorials how to program the box.
We have already installed our own custom firmware to the box.
No Arduino IDE needs to be installed, no programming needed.

Simply configure the provided files and done!
********************

We proudly present our sweet litlle Teensy Control Box!

With our easy to install, a reliable 5V power supply and our prewired and precut addressable LED-Matrix and stripes it's easy to setup DOF controlled MX lights.

Depending on table, different effects are displayed on back, sides and under the playfield.
These effects are controlled through DOF and the configuration files of the corresponding table settings.

Our little box contains a preprogrammed Teensy 3.2 which is configured to match our custom made LED packages
and has 4 outputs for:
Playfield Back MX - 8x48 Matrix
Playfield left MX - 1m/144 WS2812b LED Strip
Playfield right MX - 1m/144 WS2812b LED Strip
Undercab complex MX - 2x1m/144 WS2812b LED Strip

The Set contains of:
Teensy 3.2
Cirquitry
4 above mentioned preconfigured outputs with the matching terminals/cables for solderless and crimp-free mounting your stripes
4 Power inputs (screw terminals) for even power distribution of all connected devices

Just simply clip your strip into the matching port and it's ready to go, no fiddling, no loose wires no ugly, bare pcb!

All you need is copy 2 provided files (cabinet.xml and directoutputconfig30.xml) to your DirectOutput directory

If you need a different configuration just simply leave a note or contact us before ordering.

For propper function a power supply (5V >25A) and of course LED Matrix and/or LED stripes are needed.
Both can be found at our shop.

Item information	Value
Shipping weight:	0,30 kg
Item weight:	0,20 kg

Average item rating

All reviews:

How do reviews work?

Total entries: 1

Toller Controller
funktioniert super, ist schnell einzurichten und man muss nicht löten. Bei der Installation wird auch schnell geholfen wenn man mal nicht weiter kommt.

Thomas S. , 23.12.2023 Verified purchase

Reply by GermanGamingSupplies:

Vielen Dank für das nette Feedback

08.01.2024

Total entries: 1

Config-Dateien

Im Zip-File sind alle notwendigen Datien enthalten. Diese müssen in den /DirectOutput/Config-Ordner entpackt werden.

Config-Dateien

addressable LEDs

Adressable LED Matrix Williams Standard Body

110,00 € *

LED Matrix Williams Widebody 56x8

115,00 € *

Power Supply 5V 40A

48,00 € *

WS2812b LED stripe 144Leds/m

23,90 € *

Others also bought:

extension cable 100cm

2,10 € *

WS2812b LED stripe 144Leds/m

23,90 € *

extension cable 150cm for addressable LEDs

2,50 € *

LED Matrix Williams Widebody 56x8

Summer Break

We’ll be taking a summer break from July 23 through August 4. After several intense and demanding months, we’re using this time to recharge, gather fresh inspiration and develop new ideas.

We’ll be back on August 5 with new products, exciting improvements and the latest news about our VR VPin.

We look forward to starting this next chapter with renewed energy and sharing it with all of you!